A Del-Val Food Ingredients Brand

Donut Glaze Stabilizer

Donut Glaze and Icing Stabilizers

Make Stable Non-Weeping Glaze

Glaze that does not melt off

Package Stability

Key Blends sells the highest quality donut glaze stabilizer on the market.  We are donut experts and we understand the relationship between the donut dough and the donut glaze formulation.  This careful balance creates the highest quality glaze. We produce high-quality donut mixes and donut glaze stabilizers.


Download - Glaze Stabilizer Datasheet 

                  Transparent Glaze Stabilizer Datasheet

Our donut glaze stabilizer concentrate contains a unique blend of gums, buffering agents and emulsifiers to maximize glaze stability.  These stabilizers are available for export as they are non-GMO and only contain "internationally friendly" ingredients that are allowed in most countries.

High-quality high strength agar is key to producing a high-quality donut glaze stabilizer.  Many glaze stabilizers have slowly been diluted down over the years to help control costs.  Many of these donut glaze stabilizers no longer have the gel strength needed to produce a stable glaze.  The price of agar has increased significantly every year for quite some time.  High strength agars now cost $10-17/lb.  If you have seen more issues with donut glaze weeping over the past few years, you have most likely had an inferior donut glaze stabilizer that has had its agar diluted.  We will never dilute our functional ingredients to save money.  Our donut glaze stabilizers contain high levels of the highest quality agar available.


Please call us for samples of our glaze and icing stabilizers.  We can improve your product!


How to make Donut Glaze

The most important thing to know  is how to make shelf stable donut glazes and icings is that a cooked glaze must be used.

There are many RTU (ready to use) glazes and icings on the market. They are very convenient, but they have very little stability. If you want a glaze or icing that has a shelf life of greater than 6 hours, the glaze must be a cooked type glaze and it must contain a high-quality stabilizer that is activated by boiling in water for 3 minutes. There is currently no way around this.


Icing and glazes for sweet goods and donuts are water icings that are non-aerated and consist of mostly sugar and water. Typically glazes are used on yeast raised donuts and honey buns where icings are used on sweet dough, Danish, honey buns, cake donuts and yeast raised donuts.


For icings, the water content is 12 to 15% and the sugar content is 82-85%. This will be a more viscous product that is applied to the top surface only. Usually more white in color. Many icings contain white color such as titanium dioxide. The lower water content and the fact that it is applied on a cooled baked good allows for an improved weepage free shelf life.


For donut glazes, the water content is 20-25% and the sugar content is 70-75%. This will make a less viscous product that will flow over the entire product almost enrobing the donut. The end glaze will be slightly clear. Glazes are usually applied on hot donuts and glazes have more weepage and breakdown issues on shelf life. Moisture from the donut will transfer to the donut glaze. The water activity of a donut is around 0.93 aw where the water activity of a glaze approximately 0.71 aw. As long as there is a significant difference in the water activities of the 2 phases, there will always be moisture migration going from the donut to the glaze causing problems. A high-quality agar in the donut glaze stabilizer helps minimize this.


The icing or glaze system is a two-phase system consisting of small sugar crystals dispersed in a saturated sugar solution stabilized with agar. The key to making a successful glaze or icing is to develop a product which contains the minimum amount of syrup. Therefore, maintaining the quality of a glaze or icing is dependent on controlling the syrup in the system. The worst mistake is adding water to the glaze to thin it down. Never add water to thin down a donut glaze or icing.


Sugars in Donut Glaze

Stability of donut glazes and icings is dependent on maintaining a constant sugar crystal to syrup ratio during shelf life. Changes of more syrup during shelf life results in weepage. Loss of moisture will result in cracking and chipping of the icing. Moisture loss from the glaze or icing can also result in osmotic pressure of the lower water activity glaze or icing pulling moisture from the higher water activity dough. This will cause substantial drying of the crumb.


Maintaining the syrup to sugar ratio is critical in maintaining a satisfactory product over shelf life.

Granulated sugar is used in the boiling phase (syrup phase) of the process. This sugar is important for several reasons. First, the sugar will raise the boiling point of the syrup allowing a hotter donut glaze or icing to be made. In addition, this hot syrup will create a super saturated sugar solution upon cooling which will help maintain the sugar solids to syrup ratio.


Powder sugar usually 6x sugar is used for the fine sugar crystal phase.

Humectants such as corn syrup or invert sugar can absorb water and help prevent evaporation from the donut icing or glaze to a limited extent. However, they can also create sticky glazes and icings and will retard drying. Melting of the donut glaze or icing can occur during shelf life. Humectants are used to a very limited degree usually used to help improve shine and limit cracking. Typical levels are 2-4% of the powdered sugar content. Avoid using these in donut glazes that are going into closed packages.


Water in Donut Glaze

The amount of water in a donut icing or glaze is usually the controlling factor in the stability of the glaze or icing. It is very important to limit the amount of water. Even a small amount of extra water in the syrup can have significant increases in glaze weepage.


Glazes and icings with higher water content are thinner and are easier to apply. This is especially true for donut glazes. Using higher water levels will result in significantly more glaze weepage. A better way would be to add more granulated sugar to the syrup to increase the glaze temperature. Higher glaze and icing temperatures will result in thinner easier to apply glazes and icings.


Shortening in Donut Glaze

Two types of fats are typical in donut glazes and icings: Hard fat flakes with a melting point of 120F and higher and standard bakery shortenings with melting points of 110-120F. Shortenings help speed up drying rates of glazes and icings and they can provide some stability. Fat can also help maintain the sugar to syrup ratio by making fat barriers that prevent sugar and syrups from migrating. Shortening also assists with helping the icing or glaze adhere to the baked good.


Levels vary with climate and packaging types. In the past levels of 1% to 4% or the powder sugar levels were typical. We have seen improved packaged glaze stability for levels up to 10%. Higher levels are useful in items to be frozen. However, excess levels of hard fat flakes can produce brittle icings and glazes that can chip and flake and can set too fast and can be waxy. In packaged donuts the fault level is well above 10% fat.

Soybean oil is occasionally used at low levels to improve gloss.


Processing Donut glazes and icings

The process of making donut glazes and icings is a 2 or better yet a 3 stage process. Boiling the agar-based stabilizer  will fully hydrate the agar.  Agar must be fully hydrated in this boiling stage to achieve maximum functionality.  Adding the sugar after this hydration step produces a more stable donut glaze.


The first stage is the boiling of the stabilizer.

The gums in the stabilizer  MUST be boiled to fully hydrate the gum. This must be done if you wish to have a stable donut glaze or icing. The water and the stabilizer are added to the steam kettle and this is brought to a rolling boil for 3 minutes. Enough time and temperature are needed to fully hydrate the gums to gain full functionality. Do not skimp on this stage. Over-boiling will create thick donut glaze due to excessive moisture loss.


The second stage is to add the sugar to the boil and reboil. Sugar will compete with the gums during the hydration stage. That is the reason why you should do this in 2 steps. Many do this in a single step, but the results are not as consistent. Bring the syrup to a boil a second time for 2 minutes and add the hard fat, shortening, and emulsifiers.


The syrup should then be mixed with the powdered sugar. The process for a liquidifier vs. a vertical mixer is slightly different.

Vertical mixer- slowly add syrup over 3 to 4 stages to prevent lumps.


Liquidifier- add all powdered sugar and allow the high shear machine smooth out glaze.


Application of Donut Glazes

Apply donut glazes and icings at 135 to 145F. This recommendation is much higher than those of the past. Lower water levels are needed in the syrup phase at these temperatures and will allow the glaze to flow well and set fast. Our experience shows much better results with these higher application temperatures.


Do not allow the temperatures to exceed 150F.  Excessive temperatures will create a gritty donut glaze

Avoid thinning the donut glaze. If it must be done use simple syrup. If your production staff is using simple syrup on a regular basis, this indicates the batch size is too large. Remember, the syrup ratio is critical and constantly adding simple syrup to thin out the glaze is an indicator that the syrup to sugar ratio is changing too much.